Top 10 Adjustable Angle Knife Sharpener UK – Sharpening Stones

As an Amazon Associate I earn from qualifying purchases.

1. Faithfull


Faithfull Tools FAIDWKIT 200 x 70 mm Diamond Sharpening Stone with Stand and Case. Double Sided Stone: 400G coarse and 1000G fine

Faithfull #ad - The benefit of these stones over a traditional abrasive sharpening stone is that the sharpening surface remains absolutely flat and will not ‘groove’ over time. Diamond stones will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain.

Ideal for general purpose sharpening of chisels, scissors, cutting blades, plane blades, knives, TCT router bits and any tool that requires a sharp edge. The abs plastic base has non-slip pads for use on most surfaces, a storage pouch is also included. This stone sharpening system is ideal for quick, easy and effortless sharpening of any blade.

This is essential in order to provide consistent straight edges on precision cutting tools such as wood chisels and plane irons. The double sided 70mm x 200mm metal stone is electroplated with monocrystalline diamond in two grits, 400G Coarse and 1000G Fine. Can be used dry or with water as a lubricant, no oils are necessary.
BrandFaithfull #ad
ManufacturerFaithfull #ad
Length11.81 cm (4.65 Inches)
Width1.77 cm (0.7 Inches)
Warranty1 year.



SCOTTCHEN Sharpening Stone Sink Bridge Whetstone Holder with Adjustable 17-3/4" No-Slip Rubber for Easy Honing 304 Stainless Steel

SCOTTCHEN #ad - Good effectthis sink bridge use Solid Rubber Body with elastic touch feeling has strong surface friction, well keep stones from sliding during honing.

Widely usethis sink bridge can be used over your kitchen sink, table top, granite countertop due to the anti-slide feature of rubber material. Dimensiontotal l x w x h: 19-7/8" x 5" x 2". Fit sizefit stones length from 3-1/4" to 14-1/4" via adjustable screws. Fit for sink pool inner length up to 17-3/4". Special designdurable 304 stainless steel pole good for anti-rust, solid rubber is more durable and provide long service term. Limited 1-year warranty.
ManufacturerSCOTTCHEN #ad
Height5.08 cm (2 Inches)
Length50.5 cm (19.88 Inches)
Width12.7 cm (5 Inches)
Part NumberYM-013



2 Side Grit Coarse 325 / Extra Fine 1200, SHARPAL 156N Diamond Whetstone Knife Sharpener with Storage Base, Diamond Sharpening Stone with Non-Slip Base and Angle Guide 152 x 63mm / 6 x 2.5 Inch

SHARPAL #ad - Sharpen and hone all hard material including high Speed Steel, Carbide, Ceramic & Cubic Boron Nitride. No messy oil or water needed. Superior bonus pack: includes storage box with non-slip rubber pad that can be used as a stone base while sharpening; With Sharpening Angle Guide integrated with 4 universal angles-14°, 17°, 20°, 25° and instruction manual inside of packaging.

Super flat surface: sharpal exclusive mirrorFlat technology guarantees long-lasting even contact with knives or tools, while oil stone and water stone easily wear down with uneven surface. Fast, durable and heavy-duty: industrial monocrystalline diamonds are electroplated onto a steel base of 09 cm thickness. Dual grit: coarse 325 grit 45 micron for quick edge setting; Extra fine 1200 grit 9 micron for honing. Up to 5 times faster sharpening than oil stone, water stone. Sharpen dry.
BrandSHARPAL #ad
ManufacturerSharpal #ad
Height1.26 cm (0.5 Inches)
Length6.5 cm (2.56 Inches)
Weight0.45 kg (1 Pounds)
Part Number156N
WarrantyEach sharpal product is warranted to be free from defects in material and workmanship for 3 years from the date of purchase under normal wear and tear, except for damage caused by misuse or alteration. This warranty applies only to non-industrial or non-commercial use.



Tormek Angle Setter for Sharpening System WM-200 Angle Master. Sets The Perfect Angle for Sharpening Blades. Works on Sharpening Systems.

TORMEK #ad - Exact setting is achieved Irrespective of the Degree of Stone Wear. Edge angles can be set between 10-to-75 Degrees. Features two magnets for storage. Adjustable to any Stone Diameter from 250mm to 150mm. Sets and measures the Edge Angle.
BrandTORMEK #ad
ManufacturerTormek #ad
Part NumberWM-200

5. DMT


Multi-Colour, DMT A-PROKIT Aligner Prokit Diamond Sharpener

DMT #ad - Three diamond stones in extra-fine to polish and refine an edge, fine for a razor sharp edge and coarse to transform a dull edge along with a fine serrated sharpener accessory. No oil is needed-sharpen dry or with water. Durable construction will provide years of performance and reliable service. Sharpens knives faster than conventional stones with DMT's micronized monocrystalline diamond surface. New easy to store and carry container neatly holds all the Aligner components.
BrandDMT #ad
ManufacturerAcme United Corporation #ad
Height21.59 cm (8.5 Inches)
Length38.1 cm (15 Inches)
Width29.21 cm (11.5 Inches)
WarrantyGuarantee – you acquire from dmt with purchase of our products in europe also a promise without restriction of your legal warranty rights. If your dmt product fails to perform due to defects in material or workmanship, we will replace it 25 years after purchase free of charge. Normal wear, improper cleaning or misuse is not covered by the warranty. Defective products will be repaired, replaced or substituted with the same or one of equal value. Please send the product, if possible original-packed and including proof of purchase with an explanation of the defect. Acme united europe gmbh, junkerstr. 13-15,d-42699 solingen, germany.



ATLIN Honing Guide, Fits Chisels 1/8� to 1-7/8� Fits Planer Blades 1-3/8� to 3-1/8�

ATLIN #ad - Projection measurements for 25° and 30° angles are conveniently located on the packaging and on the cast aluminum body of the tool. Chisel sharpening has never been so easy. The body of the chisel sharpener is crafted from durable cast aluminum. Easily extend the life of your tools - forget the days of trying to find the correct angle by hand or accidentally tapering the edge of your tools.

Sizing & compatibility - self centering and fully adjustable, this sharpening guide will fit chisels from 1/8" to 1-7/8" in width, and plane irons from 1-3/8" to 3-1/8" in width. Included with your order are illustrated, step-by-step instructions which detail how to get the perfect edge every time. Includes flat jaws for clamping mortise chisels, and grooved jaws for clamping paring chisels and planer blades.

Instructions included - honing jigs can appear deceptively simple, however there is more to them than most people realize. Choose your own angle - all standard sharpening angles can be achieved using this sharpening jig by adjusting the tool projection. Built to last - the atlin honing tool features a hardened steel roller wheel which will not wear down over time or develop flat spots. The atlin honing guide allows you to easily choose your desired sharpening angle, and consistently achieve the perfect edge on your tools.
BrandATLIN #ad
ManufacturerATLIN #ad
Height10.41 cm (4.1 Inches)
Length3.81 cm (1.5 Inches)
Width3.3 cm (1.3 Inches)
Part NumberWO1002A



EZARC Chisel Honing Guide, Jig Metal Angle Sharpener for Chisel Edge Sharpening Angle Guide Abrasive Tools

EZARC #ad - And use easily works on both oilstones and waterstones. Widely applicationcurved design to fit a variety of woodworking chisel types. Choose the right anglesharpening angles can be accurated to set using sharpening jig by adjusting the tool projection.

Honing guide can be used for wood chisel, graving knife, graver, blade, plane Iron, flat chisel, planer, edge sharpening. Adjustable clamping widthby rotating the screw-cap to adjust the clamping width. The sharpening guide fits chisels from 3mm to 47mm in width, and plane irons from 34mm to 79mm in width. Totally coated with anti-rust paint, not easy to rust, lasting and durable.

Easy to usethe design of replacing the ordinary steel wheel with a bearing wheel, using more smoothly. The honing guide can precisely sharpen edge for your tools due to the working face was carefully processed. Premium honing guidechisel sharpener is made from durable cast aluminum. If chisel projection 30mm for 30° and 40mm for 25° angles, planeiron projection 38mm for 30° and 50mm for 25° angles.
BrandEZARC #ad
ManufacturerEZARC #ad
Length0.01 cm (0 Inches)
Part Number81WS1001



25 Degree , 20 Degree , SHARPAL 196N 2 Pack 4-in-1 Whetstone Knife Sharpening Aid for Sharpening Knives by Whetstone for Angle 14 Degree , 17 Degree , Black,orange

SHARPAL #ad - The orange angle guide is with magnetic base applied to sharpening stone of ferrous metal construction. Patent pending design to guarantee exact angle regardless of blade size. The black one is with anti-slip rubber pad base applied to traditional sharpening stone, ceramic whetstone, etc. It makes sharpening blade edge like a pro! Each integrated with 4 universal angles-14°, 17°, 20°, 25°.
BrandSHARPAL #ad
ManufacturerSharpal Inc. #ad



Knife Making Angle Grind Guide for Belt Sander Machine, Belt Knife Sharpener Jig with Tool Rest, 7-3/4’’ Long Sharpening Locator Adjustable Angle, OneChoi Belt Grinder Knife Jig

ONECHOI #ad - Easy to clamp∮ -it has 44 tapped mounting holes 1/4-20 unc and 6 additional bolts to connect your knives, 2 galvanized rectangular clamp plates and bolts can be used to fix knives at any height for many different knife models. All parts and contact surfaces are anodized to prevent corrosion and rust.

The super fine thread turnbuckle can be adjusted absolutely accurately. The dial is engraved with a scale with an adjustable range of -5°~25°. Easy to grind∮ -the sharpening jig is suitable for most electric or manual grinders with or with tool rest. Comfort use∮ -the aluminum handle gives a solid feel without extra weight. Material∮ -the jig is a non-corrosive body made of t6 6061 aluminum alloy and is manufactured with sensitive cnc machines. The lock knob and turnbuckle combination on the dial ensure zero movement.

The pointer can be adjusted with a wrench to achieve absolute precision. The most common aluminum profile in use today is T6-6061 alloy, which has very high tensile strength. The surface is ground and closely fitted to provide the maximum perpendicularity that affects the shape of the final blade. It can be quickly and easily installed directly on the worktable in front of the grinder. Clamping the blade securely to the bevel jig with 2 clamps rather than the bolts, it will get a firmer grip and accepts up to 11 mm 0
BrandONECHOI #ad
ManufacturerOnlyone Store #ad
Height8.89 cm (3.5 Inches)
Length22.86 cm (9 Inches)
Width29.97 cm (11.8 Inches)



GEOCCI Adjustable Height Clamp Support for Work Sharp Precision Adjust Knife Sharpener(black)

GEOCCI #ad - This part is designed to strengthen the clamp arm and allow for easy placement and removal. The height of the stand is adjustable to increase or decrease the pressure to push back on the arm. This clamp arm brace provides improved stability and support during knife sharpening sessions, enabling users to achieve consistent and precise sharpening results on various blade types.

We will be dedicated to assisting you. Within three months from the date of receiving the goods, you can apply for a return or exchange. Tailor-made for work sharp precision Adjust Knife Sharpener, it seamlessly integrates with your sharpening tool, making the sharpening process even more seamless. Made from high-quality materials, the Clamp Arm Brace is built to withstand regular use and maintain its performance over time, ensuring long-lasting reliability.

If you encounter any issues during the shopping process or have any suggestions, if you are not satisfied with the products or for any other reason, please feel free to contact our customer service team at any time. We are committed to providing you with high-quality products and considerate after-sales service.
BrandGEOCCI #ad
Height3.3 cm (1.3 Inches)
Length2.54 cm (1 Inches)
Width2.54 cm (1 Inches)